Chapter 11 Monitoring
11-22
2) Show function
The user can select the column as desired.
[Steps]
1. On the variable monitoring window, click the right button of the mouse to select [View Option]-[Column
Name (PLC, Program, Variable/Device, Value, Device/Variable, Comment)] on the menu displayed.
2. Hide the column selected.
3. Select again the same menu to show the column selected.
Notes
a. Default is Show All.
b. This function is also available in Detailed View mode.
c. The value column does not support Hide function.
d. If converted to Detailed or Brief View mode, hidden columns will be displayed as default.
e. String in the hidden columns can not be copied. Thus, the String in the hidden columns can not be pasted
onto other editors.
3) Display
Display of the monitoring value of the device registered on the variable monitoring can be changed.
[Steps]
1. On the variable monitoring window, click the right button of the mouse to select [Unsigned Decimal,
Signed Decimal, Hexadecimal and String] on the menu displayed.
To Next Page
Loading...
