Chapter 11 Monitoring
11-4
11.1.3 Pause Monitoring
Monitoring can be momentarily stopped or restarted directly by user during monitoring.
1) Pause Monitoring
The user can directly stop monitoring momentarily.
[Steps]
1. Select [Online]-[Connect] on the menu for on-line connection to PLC.
2. Select [Monitor]-[Start Monitoring] on the menu to start monitoring.
3. Select [Monitor]-[Pause] on the menu to stop monitoring momentarily.
2) Restart Monitoring
The user can directly restart monitoring when it is momentarily stopped.
[Steps]
Select [Monitor]-[Resume] on the menu to restart monitoring.
Notes
a. PLC is in Run mode, even if monitoring is momentarily stopped.
b. Momentarily stopped monitoring only can be restarted.
c. Monitoring value will not be renewed if program screen is moved with Pause Monitoring.
d. If current value is changed with Pause Monitoring, PLC value will be changed but monitoring value of
program screen will not be renewed.
3) Pausing Conditions
If specified device meets the pausing conditions, monitoring will stop momentarily.
[Steps]
1. Select [Monitor]-[Pausing Conditions] on the menu.
2. Specify device on dialog box of Pausing Conditions.
3. Click OK to save details.
To Next Page
Loading...
