Chapter 5 LD Edit
5-15
5.2.5 Input Line
The horizontal line shall be inputted for horizontal connection between LD Edit factors, and the vertical line
shall be for vertical connection.
1) Horizontal Line Input
[Steps]
1. Move the cursor onto the location to connect to.
2. Select the Shortcut Key of Horizontal Line Input. Or select Horizontal Line on the tool box and select the
Edit area to input the Horizontal Line in.
2) Vertical Line Input
[Steps]
1. Move the cursor onto the location to connect to.
2. Select the Shortcut Key of Vertical Line Input. Or select Vertical Line on the tool box and select the Edit
area to input the Vertical Line in.
To Next Page
Loading...
