Chapter 5 LD Edit
5-51
5.4.3 Go To
It is used to move to the specified line position, or go to the position of the edited label and rung comment.
1) Go to Line
[Steps]
1. Select [Find/Replace]-[Go To]-[Step] on the menu.
[Dialog Box]
[Description of Dialog Box]
a. Go to what: used to input the line to go to
b. Program list: used to display the list of the present PLC programs
c. Go to: closes the Dialog Box to go to the selected program’s step to find
d. Cancel: closes the Dialog Box.
2. Input the step to move to on the Dialog Box.
Notes
- It is available only in the LD program going to line.
- The LD used for SFC Action/Transition is not available in Go To.
a
b
c d
To Next Page
Loading...
