LS Industrial Systems XG5000 User Manual

Chapter 3 Project
3-5
3.2.2 Open Project
[Steps]
1. Select [Project]-[Open Project] on the menu.
[Dialog Box]
2. If Project File is selected, user defined comment will appear on the comment which will help the user to
select the project. If project file is selected, Click [Open].
3.2.3 Open from PLC
It is used to read the project stored in PLC to make a new project. If the project is already open in XG5000,
this project will be closed to create a new project.
[Steps]
1. Select [Project]-[Open from PLC] on the menu.

LS Industrial Systems XG5000 Specifications

General

Manufacturer	LS Industrial Systems
Model	XG5000
Category	Controller
Simulation	Yes
Memory Capacity	Varies by PLC model
I/O Capacity	Varies by PLC model
Dimensions	Varies by PLC model
Weight	Varies by PLC model
Type	Programming Tool
Supported PLC Series	XGB, XGI, XGR, XGK
Programming Languages	Ladder Diagram (LD), Instruction List (IL), Function Block Diagram (FBD), Structured Text (ST), Sequential Function Chart (SFC)
Operating System	Windows
Communication Interface	RS-232, USB, Ethernet
Communication Protocols	Modbus RTU, Modbus TCP, Ethernet/IP, Modbus, LS Bus