LS Industrial Systems XG5000 - Copy, Cut, Delete and Paste

Chapter 4 Variable
4-8
4.2.2 Copy, Cut, Delete and Paste
Copy, cut, delete or paste can be executed to edit the list of global/direct variables used in the program.
1) Copy
It is used to save the data of the area selected to copy in the clipboard. The copied details can be added to
the present project or other projects. Paste on other applications is also available
[Steps]
1. Select the area to copy.
2. Select [Edit] - [Copy] on the menu.
Notes
- How to select the area is as follows;
- Use the mouse to select the cell of (0,0) in order to select the whole table
- Select [Edit] - [Select All] in order to select the whole table.
- Use the mouse to select the column header of the cell in order to select the whole columns.
- Use the mouse to select the row header of the cell in order to select the whole rows.
- Use the mouse to drag the part of the cell in order to select the area.
- Use Shift + Arrow keys on the keyboard in order to select the area.
2) Delete
It is used to delete the data of the selected area from the list of global/direct variables.
[Steps]
1. Select the area to delete.
2. Select [Edit] - [Delete] on the menu
Notes
- Flag can not be edited exclusively for Read.