Chapter 4 Variable
4-9
3) Cut
It is used to save the selected data in the clipboard in order to add to the present project or other projects.
Besides, it will delete the selected data.
[Steps]
1. Select the area to cut.
2. Select [Edit]-[Cut] on the menu.
4) Paste
It displays the data saved in the clipboard on the selected position. If the data is already displayed, the Dialog
Box will be called to select and change the data.
* If the data saved in the clipboard is a part of columns,
[Steps]
1. Select the position to paste on.
2. Select [Edit]-[Paste] on the menu.
3. If the variable and direct variable are identical on the list of variables/comments, the dialog box will be
called.
[Dialog Box]
a b
c
d
e
f
g
h
To Next Page
Loading...
