Chapter 6 SFC Edit
6-31
6.3.2 SFC Property
Here describes how to edit SFC property.
[Steps]
1. Select menu [View]-[SFC].
[Dialog box]
[Dialog box description]
a. Show comment: displays the comment of step, transition, action and block.
b. Show print area: displays the printing area with thick dotted line.
c. Show page number: displays page no. printed in the print area.
d. Step column width: sets width of vertical column of step, transition location.
e. Action column width: displays width of vertical column of action location.
f. Utilize SFC split window: You can use SFC split window
g. Split window position: You may decide in which direction the window gets divided.
h. Split window contents: You may decide which contents the program displays in the split window.
i. OK: Saved the setting and close the window.
j. Cancel: Cancel the setting.
k. Apply: Apply the setting.
l. Reset category: Reset to default value of XG5000.
To Next Page
Loading...
