Chapter 11 Monitoring
11-67
[Dialog Box]
[Description of Dialog Box]
a. Device: used to display the start device to change the current value.
b. Bit number: used to display the number of bits to change the current value.
- Usually it is identical to 1, 8, 16, 32 or 64 bits as displayed on the screen.
- String format is displayed in 32*8 bits.
c. Display: used to display the data display format to change the current value.
d. Set Value: used to display the data value to change the current value.
Notes
a. If the current value is changed in string display format, the data value of 32-byte area is changed always
from the start device.
11.5.14 PLC Type Settings
It is used to display the PLC type presently set or to set device data based on the PLC type.
[Steps]
1. Select [File]-[ PLC Type Settings] on the menu.
a
b
c
d
To Next Page
Loading...
