LS Industrial Systems XG5000 - Write Selected Area on PLC

Chapter 11 Monitoring
11-65
[Dialog Box]
[Description of Dialog Box]
a. Device Area: used to display the list of the devices to read from PLC.
b. Select All: used to select all the devices in the device area.
c. Unselect All: used to cancel all the devices selected in the device area.
11.5.11 Write Selected Area on PLC
It is used to write the device data in the selected area on PLC connected.
[Steps]
1. Select the area to write on PLC.
2. Select [PLC]-[Write Selected Area to PLC] on the menu.
3. A message will be called to ask if you want to write the selected area on PLC.
4. Write the selected area on PLC.
a
b
c