LS Industrial Systems XG5000 - Selecting Member Variable from Character String List

Chapter 17 ST Edition
17-20
3. Press ‘Enter’ or double-click.
Note
Description of character string list bit map
1.
: ST language key word (IF, CASE WHILE etc.)
2.
: Variable name
3.
: Flag variable name
4.
: Function name
5.
: Function block instance name
6.
: User defined-function name
7.
: User defined-function block instance name
17.5.3 Selecting member variable from character string list
It is used to select member variable from character string list by name of FB or user data type instance.
1. Input ‘.’ after name of FB or user data type instance.
Ex.) In case that instance name of TON is TON_Inst