LS Industrial Systems XG5000 User Manual

Chapter 11 Monitoring
11-91
11.8.1 Connect
[Steps]
1. Select [Online]-[Connect] on the menu.
Notes
a. Refer to 10.1 Connect Options in XG5000 manual for details on Connect Options.
11.8.2 Trace Setting
It is used to specify trace conditions and trace device..
[Steps]
1. Select on the menu [Trace]-[Trace settings].
[Dialog Box]
a
b
c
d
e
f
g
h
j
i
k

LS Industrial Systems XG5000 Specifications

General

Manufacturer	LS Industrial Systems
Model	XG5000
Category	Controller
Simulation	Yes
Memory Capacity	Varies by PLC model
I/O Capacity	Varies by PLC model
Dimensions	Varies by PLC model
Weight	Varies by PLC model
Type	Programming Tool
Supported PLC Series	XGB, XGI, XGR, XGK
Programming Languages	Ladder Diagram (LD), Instruction List (IL), Function Block Diagram (FBD), Structured Text (ST), Sequential Function Chart (SFC)
Operating System	Windows
Communication Interface	RS-232, USB, Ethernet
Communication Protocols	Modbus RTU, Modbus TCP, Ethernet/IP, Modbus, LS Bus