Chapter 6 SFC Edit
6-46
6.4.2 Go To
You can go to designated line, edited label, rung comment.
1) Go to Step/Line
[Steps]
1. Select [Find/Replace]-[Go To]-[Step/Line] on the menu.
[Dialog box]
[Dialog box description]
a. Go to line: inputs line you want to go.
b. Program list: displays the program list of PLC.
c. Go to: closes dialog box and goes to selected step.
d. Close: Closes dialog box.
2. Input step you want to move in the dialog box.
Notes
- Go To Line is available in the LD program.
- It doesn’t operate in the LD used in the SFC Action/Transition.
a
b
c d
To Next Page
Loading...
