Chapter 11 Monitoring
11-112
11.9.5 Add/Delete selected loop
It is function to monitor easily selected loop the user uses frequently among maximum 256 loops.
Add selected loop
[Sequence]
Push the right button at block information window and select [Add/Del Selected Loop]
Check if check box in front of loop number is set or not at block information window
Check if selected loop is added or not at Select Loop tap of block information window
Delete selected loop
[Sequence]
Push the right button and select [Add/Del Selected Loop] at block information window
Check if check box in front of loop number is canceled or not at block information window.
You can cancel at Selected Loop tap.
Check if selected loop is not deleted or not at selected loop tap of block information window.
Note
You can add/delete loop or block by clicking check box of block information window.
To Next Page
Loading...
