LS Industrial Systems XG5000 - Write Loop Data to PLC; Write All Data to PLC; Read Loop Data from PLC

Chapter 11 Monitoring
11-114
11.9.8 Write loop data to PLC
It writes data value to PLC by loop unit. You can check progress through progress bar at bottom of PID
monitor
[Sequence]
Select loop at block information window
Open loop monitor window by double-clicking
Input the value at detail setting window of loop monitor window
Push the PLC Write button or select [PLC]-[Write Loop]
11.9.9 Write all data to PLC
It writes all loop data to PLC. You can check progress through progress bar at bottom of PID monitor
[Sequence]
Select [PLC]-[Write All]
11.9.10 Read loop data from PLC
It reads data value from PLC by loop unit. You can check progress through progress bar at bottom of PID
monitor
[Sequence]
Select loop at block information window
Open loop monitor window by double-clicking
Push the PLC Read button at loop monitor window or select [PLC]-[Read Loop]