Chapter 7 Programming Convenience
7-8
[Dialog Box]
[Description of Dialog Box]
a.Device Area Selection: selects a device area. The available areas are All, I area, Q area, M area, R area
and W area.
b. Device Type Selection: selects a device type. Bit, Byte, Word, Double word and Long word can be
selected.
Notes
- Select [Update Used Device] on the context menu to display the used devices
- After Used Device is executed, if you edit the program, the content of the Used Device is not updated
automatically. If you want to see the Used Device of edited program, select [Update Used Device] again.
7.2.2 View Device Uses
Double-click the mouse on the cell where the used I/O figures are displayed, or click ‘View Device Uses’ on
the context menu.
a
b
To Next Page
Loading...
