LS Industrial Systems XG5000 - Check Duplicated Coil Instantly

Chapter 7 Programming Convenience
7-5
Notes
- If ‘Output cross reference instantly’ is used, the edit speed may get slow.
- Select [Tools]-[Options]-[Edit Ladder/Mnemonic], on the Edit page to apply ‘Output cross reference
instantly’ function.
7.1.3 Check Duplicated Coil Instantly
It is used to inspect the applicable device or variable if used as duplicated whenever the coil is edited. If the
device is used as a coil in a different location inside PLC, the list for the program name, location and step will
be displayed.
[Steps]
1. Add a coil.