LS Industrial Systems XG5000 - Special Module Monitoring

Chapter 11 Monitoring
11-72
11.6 Special Module Monitoring
Select [Monitor]-[Special Module Monitoring] on the menu of XG5000 program to display “Special Module”
list dialog box (as shown in Fig. 1). “Special Module List” dialog box displays the information list of the
special module presently installed on the PLC system for the user to select a module on the list and then to
click [Monitor] in order to show “Special Module Monitoring” dialog box (as shown in Fig. 2). Through the
“Monitoring/Test” screen, the user can directly change the parameter value saved in the special module while
checking the test operation and its status of the applicable module.
[Dialog Box]
Fig. 1 Special Module Screen