LS Industrial Systems XG5000 - Print;Print Preview; Connection to PLC

Chapter 11 Monitoring
11-113
11.9.6 Print/Print Preview
It is function to print/print preview the activated loop monitor window and detail setting window
Print Preview
[Sequence]
Select [File]-[Print Preview]
Print function
[Sequence]
Select [File]-[Print] or [Print] at preview window
Note
Print/Print Preview supports only one loop at one time
11.9.7 Connection to PLC
Connects PID monitor to PLC
After connecting PLC at XG5000, if you execute PID monitor at XG5000, PID monitor connect to PLC and it
converts monitor mode
[Sequence]
Sets connection method through [PLC]-[Connection Settings]
Select [PLC]-[Connection]