LS Industrial Systems XG5000 - Start;Stop Monitoring; Special Module Monitoring

Chapter 11 Monitoring
11-35
[Detailed Description]
Classification Description
Module name Provides special module’s type and its detailed information.
O/S version Provides special module’s installed O/S version information, which will be helpfully
used for upgrading module O/S later.
O/S date Provides special module’s latest O/S updated date information.
Module status Provides special module’s present status (error code) information.
11.4.11 Start/Stop Monitoring
It reads PLC’s I/O data to display on the screen.
1) Start Monitoring
[Steps]
1. Confirm the connection status with PLC.
2. Select [PLC]-[Start Monitoring] on the menu.
2) Stop Monitoring
[Steps]
1. Confirm the connection status with PLC.
2. Select [PLC]-[Stop Monitoring] on the menu.
11.4.12 Special Module Monitoring
It executes monitoring the special module (A/D module, D/A module, HS counter module).
[Steps]
1. Confirm the connection status with PLC.
2. Select [PLC]-[Special Module Monitoring] on the menu.