LS Industrial Systems XG5000 - 9.2 I;O Parameters

Chapter 9 Parameter
9-7
9.2 I/O Parameters
It is used to specify the I/O type to be applied to PLC slot and the applicable parameters for each slot.
[Steps]
1. On the project tree, select [Parameter]-[I/O Parameters].
[Dialog Box]
[Description of Dialog Box]
a. Module List: displays the base module information and the module information based on slots. If no
module is designated in the slot, it will be displayed in ‘default’.
b. Set Base: displays only module-selected base.
c. Slot Information: edits or displays base’s module type for each slot, where detailed module information and
assigned information will be displayed.
a
c
d
e
f
g
h
i
j k
b