LS Industrial Systems XG5000 - 16.2 XG-SIM

Chapter 16 XG-SIM
16-4
16.2 XG-SIM
16.2.1 Program Window Configuration
XG-SIM program is configured as follows.
1) Channel list
It displays channels by modules and user’s favorable channels. In case of module, it displays the only modules set in I/O parameter.
Module is displayed in a format of ‘B0 (base number) S00 (slot number): module name.’
2) I/O condition
It displays single/continuous I/O conditions.
3) Status display
It displays the status of simulator.
Status Description Display
Initial
Shows initial status. Not accessible by
simulator