Chapter 11 Monitoring
11-55
[Steps]
1. Use the mouse to select the cell area to fill automatically.
2. Position the mouse at the end of the cell to make the mouse cursor shaped “+” .
3. Move the mouse with its left button pressed up/down and right/left.
4. Release the left button of the mouse.
11.5.5 Save Device
There are 3 methods available to save the device.
1) Save All Device Areas
[Steps]
1. Select [File]-[Save] on the menu.
2. Select [File]-[Save As] on the menu to save the data as a different name.
a. File extension will be set as (.mem).
2) Save Respective Device Area
[Steps]
1. Select [File]-[Export Device to File] on the menu.
a. File extension will be set as (device+m). (Ex. iim, iqm, imm,…)
To Next Page
Loading...
