LS Industrial Systems XG5000 - System Requirements for the Execution of XG-SIM; XG-SIM Execution

Chapter 16 XG-SIM
16-2
16.1.2 System Requirements for the Execution of XG-SIM
Minimum requirements: Pentium3 900MHz, 256MB RAM
Recommended requirements: Pentium4 1.5GHz, 512MB and higher RAM
XG-SIM requires higher system specifications than XG5000. If the minimum requirements are adopted, scan cycle may be extended
longer than the set fixed cycle and constant scan may not work properly, probably resulting interruption of access. In addition, even the
recommended requirements may suffer from the same symptoms. Then, irrespective of system requirements, access may be
interrupted according to user’s setting such as SLEEP mode.
Notes
- If using fixed cycle, fixed cycle error/warning dialog box is not displayed.
16.1.3 XG-SIM Execution
1. By executing XG5000, create a program to run on XG-SIM.
2. Select [Tools] – [Start Simulator] in XG5000 Menu. If XG-SIM is started, a created program is automatically downloaded onto XG-
SIM. After XG-SIM is executed, it goes to Online, Access and Stop.