LS Industrial Systems XG5000 - I;O Parameter Print Function

Chapter 9 Parameter
9-23
Notes
- “Pulse/Rev value” item among High-speed counter parameter items will be active when the Auxiliary Mode
is set to “Revolution/Unit time”.
Notes
- Refer to APM manual for details on the positioning module.
- Refer to XG-PD manual for details on the communication module.
9.2.5 I/O Parameter Print Function
This function is used to print the specified I/O parameter and detailed module information specified.
1) Print Option Setting
[Steps]
1. On I/O Parameter Dialog Box, select [Print Button]-[Print].
[Dialog Box]
a
c
b