LS Industrial Systems XG5000 - Page 392

Chapter 9 Parameter
9-22
[Description of Dialog Box]
a. Parameter Area: displays the parameter item. And if the user changes the parameter value to any other
value than the default, the String color will change [Black]Æ[Blue].
b. Maximum/Minimum value Display: as for the parameter item to input figures, if the user inputs data, an
applicable range will be displayed on the bottom of the dialog box automatically.
c. OK: applies the changed items and closes the Dialog Box.
d. Cancel: closes the Dialog Box.
[Description of Parameter items]
Parameter Setting Items Default
Counter Mode Linear Counter/Ring Counter Linear Counter
Pulse Input Mode
2-phase 1-multiplier/2-phase 2-multiplier/
2-phase 4-multiplier/CW-CCW/
1-phase 1-input 1-multiplier/
1-phase 1-input 2-multiplier/
1-phase 2-input 1-multiplier/1-phase 2-input 2-multiplier
2-phase
1-multiplier
Additional Function Mode
N/A/Count clear/Count latch/
Sampling count/Measure input frequency /
Measure rotations per unit time/Count Disable
N/A
Range Value [ms] 0-60000 0
Compared Output 0 Mode
(Single Compare) less/(Single Compare) less or equal/
(Single Compare) equal/(Single Compare) equal or greater/
(Single Compare) greater/(Section Compare) included/
(Section Compare)excluded
(Single Compare)
less
Compared Output 1 Mode As identical as specified above
(Single Compare)
less
Preset Input Value -2147483648-2147483647 0
Ring Counter, Minimum
Value
-2147483648-2147483647 0
Ring Counter, Maximum
Value
-2147483648-2147483647 0
Compared Output 0
Minimum Setting Value
-2147483648-2147483647 0
Compared Output 0
Maximum Setting Value
-2147483648-2147483647 0
Compared Output 1
Minimum Setting Value
-2147483648-2147483647 0
Compared Output 1
Maximum Setting Value
-2147483648-2147483647 0
Number of Pulses per
Rotation
0-60000 0
Frequency Display mode
1Hz/10Hz/100Hz/1000Hz 1Hz
Table 1. HS Counter Parameter Items