LS Industrial Systems XG5000 - Save; Open; Move Base

Chapter 11 Monitoring
11-37
11.4.13 Save
It is used to save the system information and data presently displayed on the screen.
[Steps]
1. Select [File]-[Save] on the menu.
2. Select [File]-[Save As] on the menu to save the data as a different name.
Notes
a. File extension will be set as (.smi).
11.4.14 Open
It is used to read the system information file previously saved.
[Steps]
1. Select [File]-[Open] on the menu.
a. Double-click an applicable file name.
b. Drag & drop the file onto the System Monitoring to open it.
11.4.15 Move Base
It selects a base to show its module information.
[Steps]
1. Move to the first base.
a. Select [Base]-[First Base] on the menu.
2. Move to the previous base.
b. Select [Base]-[Previous Base] on the menu.
3. Move to the next base.
c. Select [Base]-[Next Base] on the menu.
4. Move to the last base.
d. Select [Base]-[Last Base] on the menu.