LS Industrial Systems XG5000 - 18.2 Redundancy PLC State Window

Chapter 18 Dedicated XGR Function
18-3
18.2 Redundancy PLC State Window
Redundancy PLC state window appear automatically when XG5000 connects with XGR PLC.
[Description of dialog box]
a. Project name or program name: Project name of XG5000 or Program name of XG-PD/System Monitor
b. A-side PLC Run mode
c. A-side PLC Warning: No-display if warning is not existed.
d. A-side PLC error: No-display if error is not existed.
e. Standby CPU image: Shaded PLC
f. CPU status display: Standby, A-side
g. Signal line: 1 line – Bus topology, 2 lines – Ring topology
h. CPU status display: Master, B-side
i. B-side PLC error: No-display if warning is not existed.
j. B-side PLC warning: No-display if error is not existed.
k. B-side PLC Run mode
l. Master CPU image: Colored PLC
b
c
d
e
f
g h
i
a
l
j
k