Chapter 1 Introduction
1-13
1.5 Confirmation of Installed USB Device Driver
If USB connection is not available, check the installation status of the device driver as follows.
[Steps]
1. Click the right button of the mouse with the cursor on [My Computer] icon on the background screen, and
select [Manage] on the menu.
2. Computer Management Dialog Box will be displayed as shown in the figure below. On the left tree list of
Dialog Box, click [Computer Management (Local)]-[System Tools]-[Device Manager] in regular order. The
items displayed on the list may be different according to devices installed on the computer.
1) Normal Case
The USB device driver for XGT PLC has been installed successfully, if the list [LSIS XG Series] appears
with the figure under [Universal Serial Bus Controller].
To Next Page
Loading...
