Chapter 6 SFC Edit
6-40
Notes
- It may increase or decrease one by one in [View]-[Toolbox].
- The number of contact to set is 9 ~ 31.
- The number of contact points minimally set in LD program used for SFC action and transition is 5
6.3.8 LD Properties
In here, you can edit [View Options] about device, variable, comment, [Magnification] and [No. of Contacts]
at once.
[Steps]
1. Select [View]-[LD Properties] on the menu.
2. After editing the LD properties, press ‘OK’.
To Next Page
Loading...
