LS Industrial Systems XG5000 - System Monitoring; Basic Application

Chapter 11 Monitoring
11-27
11.4 System Monitoring
System Monitoring is used to display PLC’s slot information, I/O information assigned, module status and
data value.
11.4.1 Basic Application
There are two methods available to execute System Monitoring.
a. Select [Monitor]-[System Monitoring] on the XG5000 menu.
b. Select [Start]-[Program]-[XG5000]-[System Monitoring] on the Start menu.
Module Information Window displays the information of the slot installed on PLC. After reading the module
information saved in PLC, it displays it on the data display screen of the module information window.
Select one of those specified below to view Base.