Chapter 5 LD Edit
5-39
1. Select [View]-[Devices/Variables] Item.
5.3.6 View Device/Comment
It is used to display the device/comment for the variable or device used in the contact point, coil and
function(block).
If there is no device in the variable, the variable name only will be displayed.
[Steps]
1. Select [View]-[Devices/Comments] Item.
Notes
- If View Options are changed, it may take some time according to the amount of the edited program steps
- Print function of the Device/Variable/Comment is available. For the details of print option, refer to Chapter
14. Print.
5.3.7View Variable/Comment
It is used to display the variable/comment for the device used as the contact point, coil and Function (Block).
[Steps]
1. Select [View]-[Variable/Comment]
To Next Page
Loading...
