LS Industrial Systems XG5000 - Chapter 11 Monitoring; 11.1 Monitoring

Chapter 11 Monitoring
11-1
Chapter 11 Monitoring
11.1 Monitoring
XG5000’s monitoring functions used in common (Start/Stop Monitoring, Pause, Resume, Pausing Conditions,
Change Current Value) will be described below.
11.1.1 Start/Stop Monitoring
[Start Monitoring]
1. Select [Online]-[Connect] on the menu for on-line connection to PLC.
2. Select [Monitor]-[Start/Stop Monitoring] on the menu to start monitoring.
3. If LD or IL program is active, it will be now in monitoring mode changed.
Notes
When monitoring starts, correct value may not be monitored if PLC program and XG5000 program are
discordant.
[Stop Monitoring]
1. Select [Monitor]-[Start/Stop Monitoring] on the menu to stop monitoring.
Notes
If already started, monitoring will end. If not started yet, monitoring will start.