Chapter 18 Dedicated XGR Function
18-8
2. [View] - [Node Count] - [4]
18.4.3 Base information
It displays base information installed in base.
1. Master/Standby base
(1) It displays information and base number of CPU module.
(2) State indicator: It indicates state of CPU.
(3) RING: If it is consisted of Ring topology, LED indicates On.
(4) RED: If it is operated by Redundancy operation, LED indicates On.
(5) MASTER: If it is master mode, LED is On.
(6) CPU-A: If CPU-A is On, LED indicates On.
(7) CPU-B: If CPU-B is On, LED indicates On.
(8) RUN: If operation mode is Run mode, LED indicates On.
(9) STOP: If operation mode is Stop mode, LED indicates On.
(10) WAR: Warning is occurred in CPU, LED indicates On.
(11) ERR: Error is occurred in CPU, LED indicates On.
(12) Key state: Key state information of CPU
To Next Page
Loading...
