Chapter 18 Dedicated XGR Function
18-9
2. Expansion base
(1) It displays base number of expansion module.
3. Base information
(1) Base information contains the information of base connection and cable.
(2) By selecting expansion drive module/expansion manager and [PLC] – [Module Information], Base information will be appeared.
(3) By Double-clicking expansion drive module/expansion manager, Base information will be appeared.
[Dialog box]
[Description of dialog box]
a. Base Number: Base number which is set in the switch of base setting for expansion drive module
b. O/S version: OS version of expansion drive module
c. Node Status: It displays connection status between bases whether it is Ring or Bus operation.
d. Base Total Count: Total number of nodes
e. Port 1 Number: Base number connected with port 1
f. Port 1 Cable: Cable type (Optic/Electric) connected with port 1
- In case of Electric cable, it displays the measured length of cable for port 1.
g. Port 1 Date: In case of Electric cable, it displays the measured date for port 1.
h. Port 2 Number: Base number connected with port 2.
i. Port 2 Cable: Cable type (Optic/Electric) connected with port 2
- In case of Electric cable, it displays the measured length of cable for port 1.
j. Port 2 Date: In case of Electric cable, it displays the measured date for port 1.
To Next Page
Loading...
