Chapter 11 Monitoring
11-25
11.3.6 Shortcut Keys
All the operations are available with shortcut keys on the menu.
Notes
a. Some shortcut keys can not be changed as specified by user.
Shortcut Keys Details
Home/End On the variable monitoring window, select a cell to make the cursor into the cell in
the column where edit is available (PLC, Device, Type Column) to be in Edit mode.
Ctrl+Home/End Moves to the first or the last cell.
Ctrl+Arrow Moves from the presently selected cell to the first or the last cell to the left or right,
above or below.
Tab Moves the present cell from the left to the right.
Shift+Tab Moves the present cell from the right to the left.
Enter Moves the present cell from above to below. If the present cell is value column
during monitoring, it will change the current value as well. If the present cell is
variable column, it will register on Variable/Comment.
Shift+Enter Moves the present cell from below to above.
11.3.7 Alignment
Alignment can be changed to ascending or descending sequence.
[Steps]
1. Double-click the left mouse button positioned on the header of the column to align.
Outlined line in the above figure
To Next Page
Loading...
