LS Industrial Systems XG5000 - Remote 2 Connect Setting

Chapter 10 Online
10-7
10.1.3 Remote 2 Connect Setting
[Dialog Box]
[Description of Dialog Box]
a. Network type: used to specify PLC communication module type for remote connection. Rnet, Cnet, FEnet
and FDEnet are available for the communication modules
b. Base number: used to specify communication module’s base number of local PLC base.
c. Slot number: used to specify communication module’s slot number of local PLC base.
d. Station number: used to input communication module’s specified station Number of Remote 1.
e. IP address: used to input communication module’s specified IP address of Remote 1.
a
b
c
d
e