Chapter 4 Variable
4-4
4.1.3 Flag
[Dialog Box]
[Description of Dialog Box]
a. Flag kind: used to select kind of flag among System, HS link, P2P and PID.
b. All: used to display the whole list of the flags selected from [Flag kind]. In case of the system flag, all the
details only will be displayed on the screen. If [All] is not checked, only the flag applicable to [Parameter
number] and [Block index] will be displayed.
c. Parameter number: This will be active only for High-speed link, P2P and PID flag. Only the flag item of the
input parameter number will be displayed.
(
Example, If Parameter Number 1 is inputted, it will be as shown below.)
a b
c
d
To Next Page
Loading...
