Chapter 6 SFC Edit
6-47
2) Go To Label
[Steps]
1. Select [Find/Replace]-[Go To]-[Label] on the menu.
[Dialog box]
[Dialog box description]
a. Program: displays current PLC program list. If you select ‘All program’, it displays list of all label.
b. Label list: displays list of label used in the selected program.
c. Go to: closes dialog box and goes to selected label.
d. Close: closes dialog box without save.
2. Select label you want to go in the dialog box.
Notes
- Go To Label operates in the LD program.
- It doesn’t operate about LD used in the SFC program’s Action/Transition.
a
b
c d
To Next Page
Loading...
