Chapter 5 LD Edit
5-52
2) Go To Label
[Steps]
1. Select [Find/Replace]-[Go To]-[Label].
[Dialog Box]
[Description of Dialog Box]
a. Program: used to display the list of the present PLC programs. If ‘All Programs’ is selected, the list of all
the labels will be displayed.
b. Labels list inside the program: used to display the list of the labels used in the selected program.
c. Go To: closes the Dialog Box to go to the selected label.
d. Cancel: closes the Dialog Box.
2. Select the label to go to on the Dialog Box.
Notes
- Go To Label is available only in the LD Program.
- The LD used for SFC Action/Transition is not available in Go To Label.
a
b
c d
To Next Page
Loading...
