Chapter 11 Monitoring
11-9
Notes
a. Displayed data of application instruction can be specified on the menu [Tools]-[Options]-[Online]. Refer to
the option item in Chapter 2 Basic Application for more details.
[Monitor Stop]
1. Select [Monitor]-[Start/Stop Monitoring] on the menu.
Notes
a. All kinds of Edit are unavailable except Modification during Run Mode when monitored.
b. Refer to the 1
st
clause of this chapter, Monitor in Common for details on Pause Monitoring and Change
Current Value.
c. When monitoring starts and stops, LD diagram height will change to display application instruction’s
current value, which will take some time according to the quantity of prepared program.
To Next Page
Loading...
