Chapter 5 LD Edit
5-2
Symbol Shortcut key Description
Shift + F9 Reverse input
F9 Coil
F11 Reverse coil
Shift + F3 Set(latch) coil
Shift + F4 Reset(unlatch) coil
Shift + F5 Positive-conversion detection coil
Shift + F6 Negative-conversion detection coil
F10 Function/Function block
Shift + F7 Extended function
The following Shortcut Keys are related with the movement of the cursor. Applicable Shortcut Keys can not
be specified by users XG5000.
Shortcut Key Description
Home Moves to the start of the column.
Ctrl+Home Moves to the start of the program
Back space Deletes the present data and moves to the left.
→ Moves the present cursor to the right by a blank.
← Moves the present cursor to the left by a blank.
↑ Moves the present cursor upward by a blank.
↓ Moves the present cursor downward by a blank.
End Moves to the end of the column.
Ctrl+End Moves to the last line edited.
Notes
- Among Shortcut Keys in Edit Toolbox, ‘s’ stands for Shift key, ‘c’ for Ctrl key.
Example) Positive-conversion detection contact point: Shift + F1 → s + F1 → sF1
- The Shortcut Keys described in Edit Tool are based on the Shortcut Keys basically provided in XG5000.
- For setting details on the user defined Shortcut Keys, Refer to 2.4 Shortcut Setting in Chapter 2 Basic
Application.
To Next Page
Loading...
