Chapter 7 Programming Convenience
7-2
Column Details
-( )-: Coil
-(/)-: Reverse coil
-(S)-: Set coil
-(R)-: Reset coil
-(P)-: Positive-conversion detection coil
-(N)-: Negative-conversion detection coil
-| |-: Normally open contact point
-|/|-: Normally closed contact point
-|P|-: Positive-conversion detection contact point
-|N|-: Negative-conversion detection contact point
-[F]-: Extended function parameter
-VAR-: Function(block) I/O parameter
1) Data Alignment
Click the column header to align the applicable column. Whenever the column is clicked, it will be aligned in
the ascending and then descending sequence repeatedly. A triangle will be displayed on the basic column of
the present alignment. The normal triangle means that the alignment is in the ascending sequence, and the
reverse triangle means that the alignment is in the descending sequence.
Example.1) Alignment in the ascending sequence based on the device names
Example.2) Alignment in the descending sequence based on the device names
2) Go To
It is used to go to the position of the program using the selected device. Double-click the applicable line, or
click the right mouse button to select [Go To] on the menu.
To Next Page
Loading...
