Chapter 9 Parameter
9-16
Notes
- Input module with the input of AC can not specify the filter value.
- Standard value of the input filter shall be specified in basic parameters. Refer to 9.1 Basic Parameters for
details on the Basic Parameters.
- The input filter used to inspect the input signal will process the applicable signal as normal input if kept
identical for the filtering time. The figure below is with the input filter value of 3ms. As the input signal is
kept identical for 3ms from the moment detected by specific level, it will be processed as normal input
after 3ms.
Input filter (3ms)
Input signal
Inner signal
Input
Recognition
Input check
Time
To Next Page
Loading...
