Chapter 10 Online
10-66
[Description of Dialog Box]
a. Device: used to input the device to monitor the events. The event device shall be of the value 0 or 1 in bit
format only.
Notes
- Refer to Chapter 4 Variable/Comment for details on device type and display format.
b. Variables: displays Variable/Comment Dialog Box. The device can be selected from Variable/Comment
declared in the Variable/Comment Dialog Box.
c. Event condition: used to specify the condition to make the user event occur. If rising condition selected, the
user event will occur when the event device value changes from 0 to 1. And if falling condition selected,
the user event will occur when the event device value changes from 1 to 0. If transition condition selected,
the user event will occur whenever the event device value changes.
d. Type: used to specify the user event type. An applicable type can be selected among Information, Alarm
and Warning.
Notes
- Event type is specified by user based on the importance of the event and is used as a classifying method of
events for Event View.
- Refer to 10.17.2 Event History for more details.
e. Message: used to input an event message. The maximum length of the message is 80 characters in
English) (40 in Korean). The event message input is displayed with Event History menu.
f. OK: applies the changed items and closes the Dialog Box.
g. Cancel: closes the Dialog Box.
3. Used to input event device. Or click the Variable/Comment button to select the device from the
declared Variable/Comment.
4. Specifies event conditions.
5. Specifies event type.
6. Used to input an event message.
7. Select the Associated devices setting tap to specify the Associated devices.
To Next Page
Loading...
