Chapter 3 Project
3-2
[Description of Dialog Box]
a. Project: used to specify the whole system. Several PLCs related can be included in one project.
b. PLC: displays the system applicable to a CPU module.
c. Global/Direct Variables: global variable declaration and direct variable text can be edited and viewed.
d. Parameter: used to specify the details on operation and configuration of PLC system.
e. Basic Parameters: used to specify the basic operation.
f. I/O Parameters: used to specify the I/O module configuration.
g. User Data type: defines a structure type.
h. Scan Program: used to specify the program always executable in the sub-item.
i. New program: means the user defined program always executable.
j. Program 2: means the user defined program always executable.
k. Task: means the user defined task with a fixed cycle.
l. Task Program1: program executed under the task 1 conditions
m. User function/function block: a user creates function/function block in a sub-item.
n. Function1: function created by a user.
Notes
- Several PLCs can be included in one project. In this way, with several PLC included in one project its
management will be convenient, and monitoring several PLCs will be also available through simultaneous
connection to several PLCs with one running XG5000.
To Next Page
Loading...
