LSIS LSLV-S100 - PID Operation Sleep Mode

182
Learning Advanced Features
PID Operation Sleep Mode
If the operation continues at a frequency lower than the set condition for PID operation, the
PID operation sleep mode starts. When PID operation sleep mode starts, the operation will
stop until the feedback exceeds the parameter value set at AP.39 (PID WakeUp Lev).
PID Operation Sleep Mode Setting Details
Code
Description
AP.37 PID Sleep DT,
AP.38 PID Sleep
Freq
If an operation frequency lower than the value set at AP.38 is maintained
for the time set at AP.37, the operation stops and the PID operation
sleep mode starts.
AP.39 PID WakeUp
Lev,
AP.40 PID WakeUp
Mod
Starts the PID operation when in PID operation sleep mode.
If AP. 40 is set to 0 (Below Level), the PID operation starts when the
feedback variable is less than the value set as the AP. 39 parameter
setting. If AP. 40 is set to 1 (Above Level), the operation starts when the
feedback variable is higher than the value set at AP. 39. If AP. 40 is set to
2 (Beyond Level), the operation starts when the difference between the
reference value and the feedback variable is greater than the value set
at AP. 39.