LSIS LSLV-S100 - Cooling Fan Control

220
Learning Advanced Features
Code
Description
OU.31 Realy 1
Define,
OU.33 Q1 Define
Set multi-function relay or multi-function output to 17 (Inverter Line) or 18
(COMM line). Relay operation sequence is as follows.
5.20 Cooling Fan Control
This function turns the inverter’s heat-sink cooling fan on and off. It is used in situations
where the load stops and starts frequently, or noise free environment is required. The
correct use of cooling fan control can extend the cooling fan’s life.
Group
Code
Name
LCD Display
Parameter Setting
Setting
Range
Unit
Ad
64
Cooling fan control
FAN Control
0
During Run
0–2
-