Learning Advanced Features
cumulated electric energy consumption. Power consumption is displayed as shown below:
• Less than 1,000 kW: Units are in kW, displayed in 999.9 kW format.
• 1–99 MW: Units are in MW, displayed in 99.99 MWh format.
• 100–999 MW: Units are in MW, displayed in 999.9 MWh format.
• More than 1,000 MW: Units are in MW, displayed in 9,999 MWh format and can be displayed
up to 65,535 MW. (Values exceeding 65,535MW will reset the value to 0, and units will return
to kW. It will be displayed in 999.9 kW format).
5.38 Operation Time Monitor
Monitors inverter and fan operation time. This function is only available on the LCD loader.
Inverter operation
accumulated time
Inverter operation
accumulated time
Inverter operation
accumulated time
initialization
Cooling fan operation
accumulated time
Cooling fan operation
accumulated time
initialization
Operation Time Monitor Setting Details
Displays accumulated power supply time. Information is displayed in
[YY/MM/DD Hr: Min (0/00/00 00: 00)] format.
Displays accumulated time of voltage output by operation command
input. Information is displayed in [YY/MM/DD Hr: Min (0/00/00 00: 00)]
format.
Setting 1(Yes) will delete power supply accumulated time (On-time) and
operation accumulated time (Run-time) and is displayed as 0/00/00 00:00
format.
Displays accumulated time of inverter cooling fan operation. Information
will be displayed in [YY/MM/DD Hr: Min (0/00/00 00: 00)] format.
Setting 1(Yes) will delete cooling fan operation accumulated time(on-time)
and operation accumulated time (Run-time) and will display it in 0/00/00
00:00 format.
To Next Page
Loading...
Need help?
General
