5.2.1 Preparations on Machine 242
5.2 Preparation VJ628XE-M-00
5.2 Preparation
Before you can use the self-diagnosis function, you must make the machine ready to call up
the self-diagnosis menu.
5.2.1 Preparations on Machine
Before starting up the self-diagnosis function, prepare the following.
(1) Setting Media
Set roll media for adjustment.
For adjustment, use a MUTOH recommended media.
(2) Connecting Power Cable
Connect Power cable to the machine’s inlet Assy and insert Power plug into an outlet.
Make sure to supply power directly from a power supply outlet (AC 100 V to 120 V
or AC 220 V to 240 V). Avoid using outlets that other appliances are plugged into.
Doing so generates heat in the printer and may cause fire.
To Next Page
Loading...
Need help?
General